elektraLite RGBA Dazer, Руководство пользователя, Страница: 9 / 15

5).
RGBA
The
RGBA
setting allows the ability to calibrate the white achieved when mixing RGBA.
When
RGBA
is set to OFF, the output when Red, Green, Blue and Amber is at maximum is 255 for all four colors. By definition
this combination produces a white with a blue tinge which affects all other colors if cameras and other video equipment are
"keyed" to this.
When
RGBA
is set to ON, the output can be white balanced to whatever looks good on camera, for example. It also serves to
balance the white into a "warm" white which makes people look a lot better when they are in the light!
See Cal 2, for how to calibrate the white when the
RGBA
is turned ON.
To turn
RGBA
either OFF or ON, go through the Root Menu until
RGBA.
Press Enter and then use the ↑ or ↓ buttons to get to
either OFF or ON. Once chosen, press Enter to save the setting and then Menu to exit out back to the Root Menu.
6).
DV
The
DV
setting allows the ability of the leds to not flicker when using video camera.
The choices are NTSC or PAL. NTSC is the USA system.
To set the
DV
setting, go through the Root Menu until
DV
. Press Enter and then use the ↑ or ↓ buttons to get to either NTSC or
PAL. Once chosen, press Enter to save the setting and the Menu to exit back to the Root Menu.
16. KEY
The Key function is an access password for the fixture. The
KEY
can be turned OFF or ON which then deactivates or activates
the password.
To set the
KEY
go through the Root Menu until
KEY,
press Enter and use the ↑ or ↓ to set the
KEY
to either OFF or ON. If the
Key
is turned ON then a password is required to go into sensitive Menus and to change functions.
The password is ↑ ↓ ↑ ↓ (Up + Down + Up + Down)
17. Glass front plate.
Certain fixtures come with a glass plate. This glass plate fits onto the front of the leds. It slots in the gel frame holder and the
clip latches the plate into position.