elektraLite RGBA Dazer, Руководство пользователя, Страница: 6 / 15

11. DMX 512 Setting (address).
Sets up the address for the dmx.
Using the Menu button in the root menu go to
DMX
Press Enter to get into DMX menu and the display will read the current dmx channel.
The display will read for example
d.001
This means the fixture's current address is
001
To change it, use the ↑ or ↓ buttons to get to the correct address.
Press Enter to save the dmx address. The display will momentarily display the word "OK" and then go back to the DMX menu.
To exit out to the root directory, use the menu button.
12. Fixture Personality.
There are several different choices on how the fixture will operate.
What these "Personalities" do in terms of their channel assignments is detailed in the tables on pages 12 and 13.
To change a Personality use the Menu button to get to
PERS
Press Enter then using the ↑ or ↓ buttons go to the personality required.
Press Enter to save the Personality.
The one Personality not defined in the tables is
STAG. STAG
is short for STAGE and it is the full dmx number of channels as
detailed in the DMX Channel Assignments shown on pages 12 and 13. The full dmx number of channels is 11.
13. ID Address.
An
Elektralite RGBA Dazer
can be addressed (controlled) through the dmx or instead it can have its own unique ID address.
There are a total of 255 different ID addresses from 1 to 255.
To set up the address for a fixture, use the Menu button in the root menu go to
ID
Press Enter and then using the ↑ or ↓ buttons,to select the ID address.
Press Enter to save the address.
For the ID address to work you must chose a personality that uses the ID. For example STAG or AR1d.
This allows you to access the ID address system on channel 4.
Set the DMX address to d.001 for the fixture. So if ID address 123 is chosen then go to channel 4 on the lighting board and
set the level at 123. You will then be controlling only fixture(s) with ID address 123.