7. Operational Tips. (In Standard Mode).
A). In order to have output from the leds. The shutter (ch 7) and dimmer (ch 8) must be outputting (>001 dmx) plus any of the
individual led channels (ch 12 through to 17) must be outputting >001 dmx.
So if all 6 leds are needed full on in Red; take ch 7 and 8 to 255dmx and then take channels 12 through 17 to either 006dmx or
244dmx.
From 006dmx to 244dmx then leds crossfade through colors in the order of red
→
green
→
blue
→
white.
B). Shutter function (ch6) with shutter (ch7).
When a specific shutter function is chosen then that function becomes “active” when the corresponding shutter is applied.
For example. Pulse-effect Forward for the shutter is achieved by setting channel 6 between 016dmx - 031dmx and then ch7
becomes the speed control for the Pulse-effect Forward. 000dmx value being the slowest speed and 255dmx being the fastest
speed.
C). Virtual Color function (ch9) with Virtual Color 1 (ch10) or 2 (ch11).
When a specific color function is chosen then that function becomes “active” when the corresponding virtual color is applied.
For example. Forward spin for all the colors is achieved by setting channel 9 between 032dmx - 047dmx and then ch10 becomes
the speed control for the forward spin. 000dmx value being the slowest speed and 255dmx being the fastest speed.
Color bounce has a twist to its operation. What is happening is that the fixture “bounces” between two colors. The operator has to
use both ch10 and ch11 to set up the two colors.
