11. Personalities.
There are three different choices on how the fixture will operate.
What these "Personalities" do in terms of their channel assignments is detailed in the tables on page 7.
To change a Personality use the Menu button to get to
PERS
Press Enter then using the ↑ or ↓ buttons go to the personality required.
Press Enter to save the Personality.
12. Settings.
(Set has several Sub Menus which allow the following functions to be used).
1).
Dimmer
The Dimmer function allows different Dimmer curves to be chosen. There are 5 choices.
Choice 1:- this is Dim off. The Dimmer curve is 0 which means any change in dimmer level is
instantaneous.
Choice 2:- Dim 1. The dimmer curve has the shortest fade in and fade out time.
Choice 3:- Dim 2. The dimmer curve has the 2
nd
shortest fade in and fade out time.
Choice 4:- Dim 3. The dimmer curve has the 3
rd
shortest fade in and fade out time
Choice 5:- Dim 4. The dimmer curve has the longest fade in and the fade out time.
To access the DIM function go through the Root Menu until
DIMMER
is found. Press Enter and then use
the ↑ or ↓ buttons to get to the DIM choice required.
2).
Reset
This resets all values to their default.
Go through the Root Menu until
Settings
is displayed. Press Enter and then use the ↑ or ↓ buttons to get
to RESET. Press Enter. The display will have the cursor flashing across the bottom. The password needs
to be entered. The password is the following sequence using the ↑ and ↓ buttons.
↑ ↓ ↑ ↓ ↑ ↓ then press Enter once complete. The display will read OK followed by a return to the
RESET sub menu. The Menu button will need pressing to return to the Root Menu. Only once at the Root
Menu will the dmx control function once more. Please note the Reset also takes the dmx address back to
001.
13
.
Fans
There are several different control options for the fans.
Auto:- The fans come on when the temperature exceeds its pre-set value.
The fan turns off when the temperature falls below its pre-set value.
High:- The fans are constantly on at a high rotational speed.
Normal:- The fans are constantly on at their normal rotational speed.
Low:- The fans are constantly on at a lower than normal level. If the leds exceed their operational pre-set
temperature level, then the output is reduced as the fans are "locked" at lower rotational speed.
Off:- The fans are sent to be OFF. . If the leds exceed their operational pre-set temperature level, then the
output is reduced as the fans are "locked" OFF.
14. Key Lock
The Key function is an access password for the fixture. The
KEY
can be turned OFF or ON which then
deactivates or activates the password.
To set the
KEY LOCK
on,
go through the Root Menu until
KEY LOCK
is found
.
Press Enter and use the ↑
or ↓ to set the
KEY LOCK
to either OFF or ON. If the
Key
LOCK
is turned ON then a password is
required to go into sensitive Menus and to change functions.
The password is ↑ ↓ ↑ ↓ ↑ ↓ (Up + Down + Up + Down + Up + Down) Enter.
