1. Unpacking
Thank you for choosing the
Elektralite Warm White eyeBall IP65
fixture. For your own safety, please
read this manual before installing the fixture. This manual covers important information on installation
and applications. Please keep this manual for future reference.
The
eyeBall IP65
fixture uses 18 high powered 3 watt warm white leds in a balanced arrangement
giving incredible output. Please unpack it carefully and check whether it was damaged in shipping.
The following items should be in the box with the fixture:-
A short cable with a water resistant connector at one end and an Edison connector at the other.
A short cable with a water resistant connector at one end and a 5pin Male DMX connector at the other.
2. Safety Instructions.
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a
safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual. The
eyeBall
IP65
is a high voltage fixture. Be careful when dealing
with high voltages.
Please read this manual. If you do not read this manual and damages occur to the eyeball IP65,
then it could void the warranty.
The electric connection must be carry out by a qualified person and it is
absolutely essential that
the
WW eyeBall be
grounded
.
This is imperative and is a safety issue. So under no circumstances break
off the ground pin on the Edison plug or use the fixture where a ground is not present. A ground pin,
like the fuse for the
eyeBall IP65
is there for safety.
Always disconnect the
eyeBall IP65
from the power source, when the device is not in use or before
cleaning it. Only unplug
eyeBall IP65
from the power cord. Never pull out the plug out by pulling on the
power cord.
Please keep the
eyeball IP65
away from children and the general public. Please be intelligent and use
common sense when operating the
eyeball IP65
.
