background image

 

32 

10. SERVICE CENTRE AND CERTIFICATE OF WARRANTY

 

SERVICE STATION: 
ELEKTRAL ELEKTROMEKANIK SAN. VE. TIC. A.S. 

IZMIR ATATURK INDUSTRIAL ZONE, M.K. ATATURK BLV. 23 CIGLI 
35620, IZMIR/TURKEY 

Tel: +90 (232) 376 7300 Fax: +90 (232) 376 7030 
email: [email protected]

 

 
  

FULL WARRANTY CERTIFICATE

 

Your Unit, Model 

:..................................................................................... 

Serial/Model No      

:.................................. 

Which you purchased on __/__20__ is hereby warranted against defect in workmanship and material 

for a period as follows: 2 YEARS 

 

1.

 

Within the Warranty period, ELEKTRAL will repair or replace, without charge, any part or parts that prove to be defective. 
The  defective  instruments/parts  should  be  returned,  accompanied  by  the  attached  SERVICE  OR  REPAIR  CARD  to 
ELEKTRAL  Izmir  Ataturk  Industrial  Zone  M.K.  Ataturk  Blv.  23  Cigli  35620  Izmir-Turkey  where  the  overhaul  is  performed 
also.
 

2.

 

Upon expiration of the Warranty, ELEKTRAL A.S. further guarantees to repair this merchandise at a cost of the current 
listed ELEKTRAL price.
 

3.

 

This warranty is void if  

 

the apparatus/part has been damaged or broken down through misuse 

 

apparatus/part has been altered or tampered with in any way 

 

apparatus/part has been damaged through accident, misuse or negligence 

 

the seal, ties or stickers on the apparatus/part have been broken 

 

damage or defects occur because of lightning and/or fire 

 

replacement  or  repair  is  necessitated  be  loss  or  damage  resulting  from  any  cause  beyond  the  control  of 

ELEKTRAL 

 

the apparatus/part has been used against the instructions stated in the user’s manual 

 

your warranty has not been among our files by your request with “Warranty Information Card” 

 

only ELEKTRAL A.S.  is authorized to confirm above mentioned particulars.  

 

all price and costs are EXW Izmir-TR. All the transport or travel costs to be borne by the buyer.   

4.

 

ELEKTRAL is not to be labelled for loss of other damage allegedly resulting from defects in its products.  

5.

 

This  Warranty  gives  you  specific  legal  rights.  Please  Include  Model  Number  and  purchase  date  in  correspondence 
regarding this apparatus/part.
 

 

 

All  Warranty  Services  are  at  our  Factory.  All  transportation  risks  and  costs  to  and  pro  our 

Factory belongs to Customer.  

 

Thank you for selecting a product manufactured by ELEKTRAL A.S.  Before using your new item please take a minute to read and fill out the forms on the reverse side of this card. 

The Warranty Information Card helps us learn more about you and what you purchase. From this information come improvements and new products for you, our valued customers. Please return this 

card within 10 days of purchase. 

The full Warranty Certificate tells you that we stand behind our products and will repair this item as long as you own the product, per the terms of the warranty certificate. 

The Service or repair card is your way of communicating with our Customer Service Department should a problem occur. It helps us to quickly service your product and return it as soon as possible. 

Please complete and include this card whenever you return a product again. 

Thank you once again for selecting our product. We hope this will be one of the many ELEKTRAL products you will own. 

 
Date/Place Purchased  

:.................................. 

Invoice Date, No 

:..................................  

Dealer Company’s Title

 

:.................................. 

Address :......................................................................... 
........................................................................................ 

Telephone-Fax 

:................................... 

E-mail  :................................... 

DEALER COMPANY 

:................................... 

       

 

 

 

 

Seal & Signature  

Содержание Tru-VEND Maxi-Kafe

































Отзывы: