ELEKTRA Professional espresso coffee machines, Руководство пользователя

Страница: 38 / 51

gb
83
DATA MANAGEMENT I
DISPLAY OF FUNDAMENTAL PARAMETERS (S-M-C-B)
The following operating parameters can be read on the dual pressure gauge:
- Boiler
pressure.
- Water supply pressure (with pump off).
- Brewing pressure (with pump on).
DISPLAY OF FUNDAMENTAL PARAMETERS (K)
When “Enter” is pressed, the following operating parameters are displayed for a given time,
one after the other:
- Boiler
pressure.
- Set increase (or decrease) of brewing temperature.
DISPLAY OF FUNDAMENTAL PARAMETERS (Kwts)
When “Enter” is pressed, the following operating parameters are displayed for a given time,
one after the other:
- Boiler
pressure.
- Set increase (or decrease) of brewing temperature.
- Water supply pressure (with pump off).
- Brewing pressure (with pump on).
- Volume of softened water still available before the next salt load.
DISPLAY AND RESET OF COFFEE PRODUCTION (K-Kwts)
The system records the number of cups of coffee dispensed by each button for each group.
Each dispensing activated by double buttons corresponds to two cups of coffee.
These data can be zero-set by entering the Reset Code known to the technician.
This is done through the Basic Programming. See chapter “G - USE”.
DISPLAY AND RESET OF WATER CONSUMPTION (K-Kwts)
The system records the following:
1) Volume of softened water consumed (Kwts).
2) Volume of non-softened water consumed.
These data can be zero-set by entering the Reset Code known to the technician.
This is done through the Basic Programming. See chapter “G - USE”.
1
2
3
4
5