ELEKTRA Professional espresso coffee machines, Руководство пользователя

Страница: 16 / 51

gb
61
Installation must be carried out exclusively by a specialized technician from the Technical
Assistance Service.
The company Elektra declines any and all responsibility for tampering or interventions
carried out by non authorized persons.
Such intervention automatically renders the guarantee null and void.
ATTENTION: (USA NSF requirements)
The equipment is to be installed to comply with the Basic Plumbing Code of the
Building Offi cials and Code Administration International, Inc. (BOCA) and the Food
Service Sanitation Manual of the Food and Drug Administration (FDA).
ADJUSTING THE FEET (K-Kwts)
Place the machine on the work counter and ensure that it is level, by adjusting the length
of the feet.
Turn the chrome-plated foot counter-clockwise, when viewed from underneath, to lengthen
it and clockwise to shorten it. There are no screws or nuts to be loosened or tightened.
WATER CONNECTIONS (K-S-M-C-B)
The water is fed thanks to a connection with the drinkable water supply at a minimum
pressure of 1.5 bar and a maximum pressure of 4 bar.
Should the water supply pressure exceed 4 bar, install a pressure reducer upline of the
coffee machine / water softener system.
An external check-valve may be required to meet local regulations.
The machine has a fl exible steel-braided connection pipe with a 3/8 female connection,
approx. 1.5 metres in length.
1) Connect the fl exible pipe to the coupling located on the bottom of the machine.
2) If the machine is being installed without a water softener (not recommended unless
a centralized water softening system has been installed) connect the fl exible pipe
to the water supply.
WATER CONNECTIONS (Kwts)
The water is fed thanks to a connection with the drinkable water supply at a minimum
pressure of 1.5 bar and a maximum pressure of 4 bar.
Should the mains pressure exceed 4 bar, install a pressure reducer upline of the coffee
machine/water softener system.
An external check-valve may be required to meet local regulations.
The machine has three fl exible connecting pipes with 3/8 female connections,
approx. 1.5 metres in length.
1) Connect each fl exible pipe to the couplings located on the bottom of the machine.
The three couplings are marked “1”, “2” and “W”.
2) Flush the water supply to ensure that it is clean and after couple to it the fl exible pipe
coming from the “W” coupling.
Do not open the water supply.
INSTALLATION E
1
2
3