Assembly
1. Place plastic drip tray into position.
2. Place chrome / brass drip tray cover into plastic drip tray.
3. Place filter basket into coffee handle.
4. Attach coffee handle to group head.
5.
Attach eagle/Morano glass ball to water tank cover and place
cover into position.
Operating instructions
Starting for first time or from empty
1. Remove water tank cover and fill water tank with fresh, cold
water. (For best results use filtered or bottled water.) Replace
water tank cover.
2. Ensure the steam wand tap is in the off position.
Steam tap in the
OFF position
3. Connect the electrical plug to a suitable 240V power outlet.
4. Switch on power outlet, then switch on the machine at its on/off
switch. A red lamp in the switch should glow.
5.
Immediately
press the boiler water supply pushbutton to activate
pump and fill boiler from water tank. Hold button in until the boiler
sight glass shows that the boiler is three quarters full.
6. Press the coffee brewing pushbutton and run half a cup of water
through the group head into a cup. Continue as follows.
Normal starting
1. After the machine is switched on, the
heating element indicator light will
glow and a soft boiling sound will be
heard. The element indicator light will
go out when the boiler pressure
reaches the green band on the
pressure gauge (1–1.25 bars of
pressure).
2. When the boiler has reached its
working pressure, turn the steam tap
anti-clockwise to release a small
amount of steam into a cup.
3. Press the coffee brewing button to run about 30mls of water
through the group head into a cup. Although the machine is now
at the correct pressure it’s important to
work
the machine to get it
to the correct operating temperature. See next page.
Training manual – Micro casa semiauto
4
Содержание Micro Casa Semiautomatica
Страница 1: ...Micro Casa Semiautomatica Training Manual...
