Elekitsorparts Store Item Name: FAA-450_EU1KY_Antenna Analyzer
Item No.: H10010
Document Type: Manual
11
Picture 16: SWR plot view in measurement mode
To exit ‘Measurement’ mode, just click ‘Exit’ button, then the unit goes back to the main menu screen.
To snapshot the measurement screen, just click ‘Save snapshot’ button, it then goes into the file naming screen. Tap the numbers
and characters on the screen to name the saved file, and then click ‘OK’, see the picture below:
Picture 17: File naming screen in snapshot
7.12 Panoramic Scan
In the main screen, touching ‘Panoramic scan’ will enter the panoramic scan mode. A panoramic scan can make a measurement
really intuitive, especially when measuring an antenna’s lowest SWR points, it’s really straight-forward and helpful. You can set
the scan beginning frequency and the span, and all of the measurement results will be kept in plot on the screen.
Picture 18: Panoramic scan
In panoramic scan mode, there are 4 types of graphs(plots) could be switched between, and they are VSWR graph, R/X graph,
