4.
FAQ
4.1.
Compatible Systems
Elegoo 3.5 inch touch screen can work with Raspbian system, Ubuntu-mate system
and kali Linux system.
Systems that won’t work with this screen are recalbox, RetoPie, Kodi because this 35
inch screen is connected with Raspberry Pi through SPI buses not HDMI buses and
those systems that won’t work require HDMI buses for display and touch screen.
Besides as a starter screen, its frame rate and image quality may not be suitable for
arcade game simulator or multimedia playback center.
4.2.
White /Blank Screen
Problem
：
When charged
，
the screen is white and shows nothing in there.
Analysis
：
White/blank screen might happen because of below reasons:
Quality issue of screen
Drivers are not compatible with system
Failure in writing system
SD card format error or SD card is defective
Drivers are not installed
System is out of date or the firmware program of bootloader was changed when
updating system
（
1
）
Failure in writing system
Connect your Raspberry Pi with your desktop display using HDMI cable and the
system won’t show up in the display.
Solution
：
Rewrite system and if problem still exists after rewriting then you SD
card format might be wrong or SD card is defective.
（
2
）
SD card format error or SD card is defective
：
Rewrite system many times and system still won’t start
Solution: Wrong SD card format: Run SDFormatter.exe and format your card.
Choose SD card in your computer and right click --choose property—make sure your
SD card format is FAT32. If SD card is defective please change it to a new and
