2
Find more information at ElectrumSabers.com/Resources
If your saber does not feature a
threaded pommel, you can
remove the pommel by loosening
the set screw with one of the
provided hex keys.
Twist towards left to
unthread your pommel.
Deep Sleep
Switch
The Recharge port is also
located on this side,
underneath the switch.
Charging Your Saber
You should charge the saber before use with the provided micro USB cable, using a power
supply rated at 2A for optimal charge. The saber takes approx. 2½ hours to charge from 0%.
Each Electrum Saber is shipped in “Deep Sleep” mode to conserve battery power.
To take the saber out of “Deep Sleep” mode, remove the pommel with the provided set
screw key, or unthread it (some models) and toggle the Deep Sleep Switch so that the switch
position is toward the speaker end. Do not press hard on this switch to avoid damaging it.
You can re-enter Deep Sleep mode by toggling the Deep Sleep Switch back to the off position,
towards the blade side. This will preserve the saber battery if you need to leave it on the shelf
for long periods of time, and also functions as a basic restart.
The saber
MUST
be in deep sleep mode when charging.
Basic Operation