1
Find more information at ElectrumSabers.com/Resources
Congratulations on your new Electrum Smart Saber
®
! Your new saber is powered by the
Diatium3 Saber Core, and features these components in your package. Confirm upon receipt
that these components are included. If your package is missing any of these components,
contact the Electrum Sabercrafts team at
DO NOT attempt the remove the internal electronics saber chassis or pommel cap!
Doing so could damage the electronics and void your warranty.
The saber requires a charge source of 5V (Volt) 2A (Amps) or higher. When charging
the saber, ensure your power source is at least 5V 2A.
When charging the saber, be sure to place the saber in a position where the saber
cannot fall/be knocked onto the floor. The hilt could land on the charge cord itself and
damage the charge port.
3-Point Touch Switch
Saber Pommel
Saber Pommel Cap
DO NOT remove unless
instructed by ES staff,
or for replacement.
Saber Speaker
Micro USB Charge Cord
Set Screw Hex Wrenchs
(2 Sizes Provided*)
* 3/32 Hex Key - for button screws
* 5/64 Hex Key - for blade retention screws
*Saber Drawing is an
example. Your Saber Model
may differ.
