INSTALLATION
Attach the parts together with the wingnuts provided, as shown
above.
Clamp the aerial to the mast
between second and third
directors.
Connect the coaxial cable to the F-connector on the dipole unit.
Connect the other end of the coaxial cable to the aerial input of the
DAB radio. This is usually also an F-connector socket, but could be a
TV-coax socket. Connect the appropriate plug to the cable, or, if
using a ready-made cable, adaptors are available, part number
F399A (F-socket to TV-coax plug) from your local Electrovision dealer
(see www.electrovision.co.uk and click the "dealers" link)
Orientate the aerial so
that it points to the
nearest transmitter.
You can find the location of your nearest transmitter at
http://www.ukfree.tv/transmitter.php
If there is an obstruction in the direction of the transmitter, then
pointing the aerial slightly to one side of the obstruction may result
in improved reception.
If in doubt, observe other aerials installed in the neighbourhood, and
point the aerial in the same direction.
NOTE:These aerials are intended for use only with DAB radio
receivers (Band III, 174 - 230 MHz)
Page 3
