QUICK START GUIDE
MODEL 195Ed
1
Before You Begin
•
The ESTeem Model 195Ed wireless Ethernet radio modem is compatible with many different applications. The most common
application is to bridge two or more Ethernet devices or networks. This guide will demonstrate the basic configuration and testing of
a pair of 195Ed’s. For more detailed information, please see the ESTeem Model 195Ed User’s Manual.
•
This guide assumes you have a working knowledge of Ethernet networking, TCP/IP protocol and how to identify and set the TCP/IP
address on your computer.
•
The 195Ed can be configured using any current web browser software such as Internet Explorer, Netscape or Mozilla.
•
The following procedure will provide an initial communication link between two or more Model 195’s for testing purposes. All the
example commands listed in this guide can be adjusted to fit your communication network. Please consult the ESTeem Model
195Ed User’s Manual for more details.
Unpack Contents
Each node in your ESTeem Model 195Ed’s network may have different hardware components based upon the final installation location
(i.e Outdoor, Indoor, Point-to-point or Muti-Point). Antenna types, cable lengths, power supplies may be different, but the following
items will be required for basic setup:
Model 195Ed
AA109 Resource Disk
Antenna
(AA20DMEs
Displayed)
(2) Ethernet Cables
Power Supply
(AA175 Displayed)
Serial Interface Cable
(AA6021.1)
Note: Your accessory model numbers may vary from the above, but you will need to locate each of above items to continue
configuration.
