BRICK/CONCRETE WALL FITTING INSTRUCTIONS
•
Select a suitable position to mount the arm.
•
Use a stud detector to check for hidden cables, pipes or electric cables.
•
Place the arm against the wall and mark the holes required. (Before marking any holes
make sure that the arrow (N) is pointing upwards)
•
Drill the holes with a 8mm diameter drill bit to a depth of 50mm.
•
Insert the wall plugs (G).
•
Attach the arm to the wall using the 6x50mm bolts (F) and M6 washers (H), the bolts
should be tightened using a 12mm / 1/2 inch socket wrench or spanner.
ATTACHING BRACKETS TO TV
The A195FD TV bracket comes with a range of TV mounting accessories designed to fit
the majority of televisions. Depending upon the required parts it may be necessary to use
screws A, B, C or D with the washers (E). If you are mounting a television between 10”-36”
consult fig. 1. If the television is between 37”-50” consult fig. 2. For televisions between
37”-50” the four extension arms will need to be used. The arms are connected to the
bracket using M6 washers (H), M6 screws (I) and M6 nuts (J).
fig. 1
fig. 2
N
