Page 11 of 24 MEL-TEMP M8160 Issue 1.5
7.1.1. Connect the mains supply lead and power supply to your MEL-TEMP as illustrated.
7.1.2. The lense hood attachment is optional
It’s purpose is to assis in viewing the sample
when using the MEL-TEMP in direct light. Slide the lense hood over the threaded back
section of the lense as illustrated.
7.1.3. Adjust the arm height and oven head angle to suit by loosening the clamp screws and
adjusting as required. Retighten the clamp screws after making adjustments. Always
loosen the clamp screws before making adjustments.
7.1.4. Turn on at the mains electical supply and observe the MEL-TEMP goes through a boot
up and self check routine which include a diplay of the firmware issue release number.
