Pairing Radiators with the touch e3
1.
On the Touche3, Press the
menu
button
2.
Press and hold the Parameters button
(House with a sunshine in)
3.
Select
radio paring
4.
Press
“heating”
5.
Select room
– You may get a warning message to tell you must first be in the zone, this is just
telling you to make sure that you are next to the radiator with the touch e3. A battery is in the
Touche3 so you can walk around freely with it for a period of time. Just press the green tick.
6.
Press on
radio pairing
. It will say pairing on-going
7.
Now
go to radiator press and hold OK for 10 seconds
8.
RFI will show, press
OK
9.
Rfun will show,
press + button
(If Rf.bi shows, just press ok and go to step 11)
10.
Rf.bi will show,
press OK
11.
Now
on the touch e3
you should see
‘wait pairing on-going’
and on the
radiato
r screen you will
see a
running line
along the middle of the screen.
12.
Once the touche3 has found the radiator, it will ask you to
select either a 1 radiant panel are 2
radiant panels
, select the appropriate choice. If you are unsure, take a look behind the radiator as
best you can, if the fins look open to the wall, you have a single panel radiator, if there appears to
be a back panel and the fins are in the middle, you have a double panel.
13.
Now you will be asked to
enter the power of the radiator
, make sure you enter the wattage
correctly., then press the green tick
14.
You will then be asked to
give the device a name
, it makes sense to call this the same name as the
room, this is more so for if you have more than one radiator in the same room, so you might call it
Lounge 1 and lounge 2 if you had 2 radiators in your lounge.
15.
Now repeat this process to
pair up all of your radiat
ors.
9
Содержание DigiLine Series
Страница 1: ...1...