Electrorad DigiLine Series, Руководство пользователя, Страница: 16 / 19

FAQ’s
How do you know when the radiator is heating?
On the touche3, the flame in the middle of the house will be red and flickering. If the flame is black and constant, the radiator is not heating.
On the app, you will see 3 red wiggly lines pulsing at the side of each radiator that is on.
On the radiator, 3 wiggly lines will be present to the left of the temperature.
How do I override the temperature temporally, for example, coming home sooner than expected?
Press the menu button, scroll to the room you want to change the temperature in and then use the arrow up and down keys to select the new temperature that you
want and leave it, this will then temporarily override the current set point temperature to the one you just entered for 2 hours, if you want it for a different length of
time, press button ‘D’ on room menu, then press the egg timer on the bottom row and use the arrow keys to select the length of time you wish to override for, this
can be up to 44 days, then press the green tick. Once the time is up, the radiator will go back to your set times.
How do I use the radiator in manual mode?
On the radiator, just use the arrow keys to select either the sunshine for constant comfort, or the moon for constant set back temperature.
On the touche3, press button ‘D’ on the room menu, select the comfort key, and then press the green tick. You can now use the + and – keys on the right hand side to
increase and decrease the temperature as you wish.
How do I turn off the open window feature?
This must be done on the radiator. Press and hold the OK key for 6 seconds, at 3 seconds the time will appear, keep a hold of the button untill you see ‘rFi’. Now press
the arrow right key 5 times and then press ‘OK’. Use the + and – button to select ‘no’ then press ‘OK’ again. /now press arrow right button 4 more times to see ‘End’
and press OK. You will now be back on the original screen and the open window feature has been disabled.
How do I lock and unlock the screen?
Press the ‘OK’ button to illuminate the screen, then simultaniously press the arrow left and arrow right buttons.
How do I calibrate the radiator?
Place a thermometer in the room at 1.5m distance from the floor so that it is similar to the thermostat and check the real temperature in the room after 1 hour. On
the radiator, press and hold the OK button for 6 seconds, then press the arrow right button twice then press ‘OK’. Now using the – and + buttons, enter the real value
shown on your thermometer. At this point the hand symbol will appear and blink, press the ‘OK’ key to confirm and save the new reading. Now press the arrow right
button 7 times to see ‘End’ then press OK.
16