ESD
ESD
10
11
Program the hysterisys of setpoint no. 1
between 2 to 255 counts
Program the relay logic
high or low logic
of setpoint no. 1
between
Program the setpoint no. 1 value.
Setup Mode
B
RUN MODE
Program the hysterisys of setpoint no. 2
between 2 to 255 counts
Program the relay logic
high or low logic
of setpoint no. 2
between
Program the setpoint no. 2 value.
Note :
1. In program mode if function key is pressed at any point, unit will branch to
auto mode.
2. All values followed by Enter key will be stored, else the value will be discarded.
3. All modes have password protection. Default password is 191.
F
User can stop the totalizer action
by selecting "YES"
User can reset the totalizer value
over here by selecting "YES".
A
RUN MODE
Note :
1. In program mode if function key is pressed
at any point, unit will branch to auto mode.
2. All values followed by Enter key will be stored,
else the value will be discarded.
3. All modes have password protection.
Default password is 191.
F
