manualshive.com logo in svg

Electronics Diversified SMART, Руководство пользователя

Поделиться
Скачать
Electronics Diversified SMART Скачать руководство пользователя страница 27

SMART System

COMBINES

HOW?: PRESET VS.
ZONE COMBINING

26

The SMART System can combine
rooms in following ways: through
preset activation or zone copying.
When rooms are combined through
presets, the activation of one
preset in one room will cause the
activation of the same preset
number in other rooms. Thus, if
Preset 1 was activated in room 1 in
a two room senerio, Preset 1 in
Room 2 would activate. When
rooms are combined through zones,
zones levels of one room’s preset
will follow into other combined
rooms. Back to the two room
senerio, if Preset 1 was activated in
room 1 and zones 1 through 4 are
at full for that preset, then zones 1
through 4 in room 2 will go to full. If
the two rooms were identical, they
would both have the same look.

Within Combine Menu,
To Designate Zone Combining,

Press How:
Press  Up button for preset
combing or press Down.
button for zone combining.

Note: The setting of the combine
“How” is a global setting. All
combine actions will either be
preset or zone.

Combine 1
How: zone
Room 1
Attach?  123

Содержание SMART
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды