manualshive.com logo in svg

Electronics Diversified SMART, Руководство пользователя

Поделиться
Скачать
Electronics Diversified SMART Скачать руководство пользователя страница 10

SMART System

STATIONS

9

OVERVIEW

The SMART System can handle up to 16 stations:

6 types of stations are available on the SMART System: LCD
Slave, 10 Button, 2 Button, Digital Slider, IR Remote, and Remote
Device Interface.

 Stations can be spread out  over 1000 feet of Alpha 1133.

The SMART System can only address one station and cannot
allow “mirroring” of stations.

The Master Station itself can be used as a station and is non
addressable.
To read how to select the room the Master station will operate
turn to page 31.

SLAVE LCD STATION

Mapped Buttons:
Illuminating Buttons mapped to the display.
Any button press results in the execution of
the feature mapped to the button.

Up/ Down Buttons:
Allows user to control highlighted feature
displayed by the Mapped Buttons. Used to
adjust levels or set time.

Menu Button:
Returns to the preset menu page.

Edit Button:
Prompts for the next page within the Preset
edit pages

1.

2.

3.

4.

1

1

3

4

2

Содержание SMART
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды