Plus
28
OPERATIONS
FADER
SET FADE TIME:
Move Time slider over Crossfader to desired playback fade rate.
PLAY FADER:
Move Fader handle towards 10. Bargraph will follow manually or
according to the fade rate selected.
CLEAR A FADER OR RESTORE MANUAL CONTROL:
Press the (LOAD) button under the Crosssfader.
(NOTE: Pressing the LOAD button will release the information
assigned to the Fader.)
SUBMASTER OPERATION:
Submasters may be manually controlled or loaded on a fader
for time or crossfade control.
To operate a submaster manually:
Select active Submaster page;
Move Submaster Slider to desired level;
Submaster outputs are controlled by the Grand Master.
The Submaster page can be changed when sliders are active or
passive. This allows active Submasters from different pages to
be played at the same time.
When a Submaster from a previous page is returned to a '0'
position, the page automatically advances to the current page.
The active page number is displayed at the top of the Submaster
display area in the Stage screen on the CRT.
The previous page number is always displayed under the Slider
on the CRT.
Submasters may be edited blind on the CRT by pressing Shift
Preset and selecting the number and page of the Submaster to
be edited.
[ STAGE ]
FADER
SUBMASTER
EFFECTS
Preset
Time Percent
Page: 1
Running
-1- Pg1-Pr12 00:00.0 FL 1 2 3 4 5 6 7 8 9 10 11 12
Bounce
-2- Pg2-Sm10
00:00.0 FL
50 75 75
50
25
Page
: 1
+INDManual
00:00.0 25
Active Page
Steps :
4
4
4
Master : 0
11
•
•
