Plus
24
FADER
INDEPENDENT
Displays Setup screen.
Reviews configuration.
To temporarily remove channels stored in a preset, move the
IND MODE switch to Inhibit position.
In Inhibit mode, channels assigned to the Independent Fader
are reduced in intensity according to the level assignments of
the individual channels.
Position selected channel sliders to Full output.
Move IND FADER handle up and selected channels will move
to '0'.
In this mode, if a channel assigned to the Independent Fader
with a level of 50% and the Fader is at Full, the selected
channels' level is reduced to 50% of its computed output
level.
PILE-ON MODE
In Pile-On mode, channel levels assigned to the Independent
Fader add to the output of other sections of the console. In this
mode the Independent Fader relates to the Grand Master in
two ways; fully independent and scaled. When the Independent
Fader is assigned to the Grand Master, the Pile-On output of
the Independent Fader is scaled by the level of the Grand
Master.
If the Independent Fader is fully independent, the output is not
affected by the Grand Master, so if the Grand Master is at zero,
the levels generated by the Independent Fader will be dis-
played.
To temporarily add levels or new channels to a recorded preset,
position IND MODE switch to Pile-On. Set levels greater than
recorded. Move IND FADER handle up and selected channels
will 'Pile On'.
INHIBIT MODE
Press (LOAD) to set Manual mode.
Set IND MODE switch to INHIBIT.
Set channel sliders to percentage to be removed.
Move IND Fader to Full (10). Selected channels will be reduced
according to the proportion set on the Channel slider.
Move the IND Fader to 0. Channels are restored.
When action is complete, restore mode switch to 'Pile-On' posi-
tion.
