Electronics Diversified Omega 2 Скачать руководство пользователя страница 4

Страница: 4 / 95

Omega 2

SYSTEM DETAILS

1. FADER CONTROL BUTTONS:

Select active fader.
Allow manual takeover of automated fades.
Clear active cue from the fader.

2. MANUAL FADER CONTROLS:

Manually control cues.
Adjust fade level up or down from the capture point.
Offer Grand Master proportional control.

3. CONTROL KEYS:

Select active display screens for monitor.
Access channels and level information.
Organize recording, playback and editing sequences.
Start and stop automated features.

4. ENCODER WHEEL:

Adjusts selected channel levels proportionally.
Accelerates or slows fade times proportionally.

5. KEY SWITCH:

Controls access to power.
Controls access to record feature.

6. DISK DRIVE (located on right

ide):

Off-line storage for recorded information.
Off-line storage of custom configurations.

The Omega 2 is a microprocessor-based control system with all

operational instruction sets and controls routines embedded in

read-only memory. The control console front panel allows access to

these instructions and routines through key selections. All key

selections are echoed on the system command line located at the

bottom left of your monitor.

Here is an overview of the front panel controls.

FRONT PANEL

CONTROL KEYS

The primary access to the control system is through the keypad

controls on the front panel of the console. The keypads are grouped

together under common control headings for ease of operation.

There are six groups:

Screen Keys

Action Keys

Number Keys

Selection Keys

Fader Keys

Command Keys
The general titles for the grouping of keys indicate their functions.

The natural progression for the commands from the keypads is from

left to right.

Screen Keys

Action Keys

Number Keys

Selection Keys

Fader Keys

Command

Keys

Содержание Omega 2
































































































Результаты поиска

Содержание Omega 2

Отзывы:

Electronics Diversified Omega 2, Руководство пользователя, Страница: 4 / 95

Результаты поиска

Содержание Omega 2

Отзывы: