The material contained in this document is the property of Electronics & Innovation Ltd., it is
subject to change without notice.
August 2012 Page 5 of 10 Revision B
The supply voltage is automatically selected from 100 TO 240 VAC 47
– 63 Hz
2.4
Mains Fuse Rating
The mains fuse Fl is located on the rear panel. The replacement part number
details are:
1.6A Slow Blow E&I Part No: F977-ND. The 1.6A rating is correct for both
115 and 230 VAC
2.5
Mains Lead Connection
The unit comes supplied with a 6 foot mains cord.
2.6 Operation
Proceed as follows:
Ensure input voltage is not excessive
The IV RMS indicated maximum input voltage is 5 times the level of
the input signal required to achieve maximum output. Input voltages
in excess of 2V peak may permanently damage the instrument.
Connect the input signal via a 50 coaxial lead and BNC plug to
the input connector.
Connect the output via a 50
coaxial lead and BNC plug to the
load.
Chapter 3 Technical Information
