Electronic Systems Support EFR53 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 7 / 19

MNL-001600
Rev A
5 www.ess.to
November 2017
Max Rack Weights: (Assembled)
Reference the drawings in this manual for weights of racks.
•
Temperature: Normal operating temperatures are between 68ºF -77ºF. Note: Batteries typically
should be at 77ºF for optimum battery life and performance.
•
Clearance: A minimum of four inches is required in both the front and the rear of the Battery Rack.
This refers to obstruction of ventilation only. Clearance around rack sides is suggested by NEC and
local codes.
CAUTION! Explosion/Fire Hazard Warning:
Batteries can generate potentially explosive gas (hydrogen).
Never enclose batteries or battery racks in a sealed, airtight room.
6. INSTALLATION PRODEDURES
BEFORE PROCEEDING WITH INSTALLATION READ THE FOLLOWING:
6.1 Preparation
6.1.1 Necessary Equipment and Tools
•
Rigging tools for moving Racks. Narrow pallet jack and forklift of 8,500 lbs. minimum capacity
when moving fully loaded racks.
•
Heavily insulated assortment of hand tools.
•
Digital Voltmeter
6.1.2 Equipment Inspection
Remove the packaging material from the rack and inspect for any concealed shipping damage that
may have been overlooked upon receipt of goods. Use the packing list to verify the system has all
components and cables for installation.
6.1.3 Safety Precautions
DC VOLTAGE WARNING!
Hazardous DC Voltages are present in the battery rack. This hazard will always be present, even
when the battery system is off-line. Accidental short circuit of the positive and negative terminals will
cause tremendous currents to flow resulting in severe burns, fire and possible death. Use extreme
caution!
IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS!!
All disconnecting means should be in the open/off position before servicing.
All installation drawings and schematics should be reviewed and clearly
understood before hooking up this system.