7
ESS
M-BLASTER
VERSION XXXX
MIDI Karaoke Mp3 Player
Note: when executing the program, if correctly set, M-Blaster will
automatically position on the “USB” page.
After having done this, launch the program double clicking on the icon
previously created during installation. As for the utilization, please refer to
the on-line guide included with the software.
SWITCHING ON
To switch the M-Blaster on, it is sufficient to insert the supplied adapter
connector in the corresponding socket positioned on the back panel and
push the ON button.
The display will light and after a few seconds wait, the display will read
the following:
READING PROGRAM
Shorty followed by
fig.3
For its correct functioning M-blaster needs the Data storage unit
(Compact Flash Card), to be inserted in its proper housing (fig1/7).
Otherwise, on the display it will appear the following message:
“COMPACT FLASH NOT PRESENT”
note: The Compact Flash Cards are formatted when the product is sold;
However, if necessary, the formatting should be executed with the
following characteristics: FAT 12/16 bit formatting (it will be implemented
to FAT 32).
