INSTALLATION
Safety precaution: before and during installation, make sure that the radiator is not con-
nected to the electricity supply.
This radiator is in Insulation Class II and can therefore be installed in all rooms of homes including
zones 2 and 3 (see figure below) of a bathroom, sheltered from any contact with water(see fig.1).
In full compliance with existing regulations in France (NF C15-100), the radiator must be positioned
in such a way so as the control panel is out of reach of anyone in the shower or bath.
The radiator cannot be installed above an electrical outlet.
The radiator must be positioned at least 15 cm from any obstacle (walls, furniture, shelves etc.)
CORRECT POSITIONING OF RADIATOR
Unpack the radiator and place it carefully on the ground, using the polystyrene as protection.
Make sure that the radiator and cords have not been damaged during transport.
If damaged, do not use the radiator.
During installation, verify that the radiator is not plugged in.
Verify that the home voltage corresponds to that indicated on the radiator (220V – 230V).
For easy installation, your radiator is equipped with an installation kit containing 2 brackets, 4
screws, 4 screw anchors and a paper template (diagram indicating the position of holes to be
drilled) in function of the type and size of the radiator.
Sira Onice - INSTALLATION
ZONE 1
ZONE 2
ZONE 3
60 cm
240 cm
fig. 1
min.
15 cm
min.15 cm
min.
60 cm
English
03
