Follow the instructions below:
1.
Position the paper template against the wall holding it perfectly parallel to the floor. The
lower end of the paper should just touch the floor. In this way the radiator will be positioned
at the correct height.
2.
Using the template, use a pencil to mark the position of the 4 holes indicated for your model
of radiator. Drill 4 holes in the wall with a diameter of 10mm and a depth of 50-55mm (fig. 2)
.
Sira Onice - INSTALLATION
TEMPLATE
fig. 2
TEMPLATE
0 10x55mm
0 10x55mm
0 10x55mm
0 10x55mm
FLOOR
WALL
fig. 3
English
04
