Electron MASTERTEMP, Инструкция по эксплуатации

Страница: 11 / 80

DIGITAL TEMPERATURE MONITOR – MASTERTEMP
8
Rev 1.1
DISPLAY CONFIGURATION
Once the display is in the presentation mode (initial screen without any menu tab), its configuration is accessed
pressing the key ▼ to select one of the five possible fields. In case the menu tabs are being shown on the display,
select
home and press SET next press the key ▼.
With keys ◄ or ► select the parameter you want to be shown on that field and press the key SET to confirm. To
exit the display configuration screen, navigate with keys ▲ or ▼ until the option returns and press the key SET.
The display have 5 fields to indicate the readouts that can be configured to present up to 5 of the following
parameters.
Note: in order to one parameter be available on display indication, the Mastertemp
TM
must be configured with
that parameter enabled.
Parameters to be show non the display Presentation form in display
Temperature sensor 1
S
en1
:
0.0 °C
Temperature sensor 2
S
en2
:
0.0 °C
Temperature winding 1
W
nd1
:
0.0 °C
Temperature winding 2
W
nd2
:
0.0 °C
Temperature winding 3
W
nd3
:
0.0 °C
Final Temperature Gradient winding 1
F
TG1
:
0.0 °C
Final Temperature Gradient winding 2
F
TG2
:
0.0 °C
Final Temperature Gradient winding 3
F
TG3
:
0.0 °C
Load Percentual winding 1;
L
PE1
:
0.0 %
Load Percentual winding 2;
L
PE2
:
0.0 %
Load Percentual winding 3;
L
PE3
:
0.0 %
Current on Secondary CT1 (thermal image)
S
TC1
:
0.0 A
Current on Secondary CT2 (thermal image)
S
TC2
:
0.0 A
Current on Secondary CT3 (thermal image)
S
TC3
:
0.0 A
Current on Primary CT1 (thermal image)
P
TC1
:
0.0 kA
Current on Primary CT2 (thermal image)
P
TC2
:
0.0 kA
Current on Primary CT3 (thermal image)
P
TC3
:
0.0 kA