Electron Microscopy Sciences EMS 5000, Руководство пользователя

Страница: 17 / 23

A993 OTS5000 17
2.1.5 WARRANTY
All EMS products are unconditionally guaranteed against defects in workmanship for one year from
date of shipment as long as they have been exposed to normal and proper use. Although the one-
year warranty may have expired, please contact our Service Department before attempting any
repairs or alterations. Many of these repairs will still be performed at the factory at no charge to the
customer.
2.1.6 POLICIES
1. TECHNICAL SUPPORT: It is our policy to provide our customers with the most comprehensive
technical support in the industry. If any questions arise or problems occur, we encourage you to call
or write and we promise to promptly and comprehensively respond to your requirements.
2. TRADE-UP POLICY: It is our policy to offer customers trade-up ability as new and/or expanded
capabilities for their instruments are announced. In many cases, full credit will be given. In general,
we will allow 100% credit for two years and depreciate 20% per year thereafter. Please contact our
Marketing Department for information relating to your particular situation.
2.1.7
SERVICE
Should service be required, please contact our Service Department for a return authorization number
and instructions (215-646-1566). Please have the serial number on hand (located on the back panel).
Carefully pack the instrument before returning.
Please include a note indicating:
1. The model number and purchase date of the instrument
2. The person to contact if questions arise
3. A note stating that the unit is free of biological contaminants and the "symptoms" indicating
that repair is necessary
If the instrument is not covered by the warranty, a quotation will be forwarded to the sender detailing
the repairs necessary and charges, before repair is begun.
2.2 INSTALLATION
Initial Installation:
1. Set the unit on a solid level surface.
2. Install the line cord into the receptacle on the back of the unit.
3. Ensure power switch on the back panel is in the "Off" position. (Indicated by the O side of the
rocker switch pressed in.)
4. Plug the line cord into a into a properly grounded wall receptacle.
Foot Pedal Installation:
1. Ensure power switch on the back panel is in the "Off" position. (Indicated by the O side of the
rocker switch pressed in.)
2. Install the foot switch plug into the ¼
” jack located on the back panel.