3
D
12
page
CONNECT THE WIRES TO
THE -TENS- UNIT AT THE
INPUT OF EACH CHANNEL
C
The electrodes used with this device must never be smaller than
2.54 cm in diameter. We caution you that the smaller the electrodes,
the greater the stimulation intensity in the area where the electrodes
are placed, which increases the risk of skin irritation in that area. The
risk of skin irritation also occurs when self-adhesive electrodes do not
stick properly to the entire surface due to a lack of adhesion. Replacing
the self-adhesive electrodes after a maximum of 15 to 20 uses ensures
superior device performance. Use carbon electrodes with electrode
gel to ensure a proper and effective current flow. Please refer to the
additional instructions provided on the electrode packaging.
on non-irritated skin that has been
washed with water, cleaned, and
dried thoroughly for better electrode
adhesion and optimal performance.
To optimize your results, we recommend that you
evaluate your pain before, during, and after treatment,
using the pain scale
B
3.1
CONNECTION
CONNECT THE ELECTRODES
TO THE WIRES
A
TURN ON
THE DEVICE
ATTACH ELECTRODES
Do not position the
device where access
to the main source of
the device would make
it difficult to shut the
device down quickly if
necessary.
Pain
Scale
Intensity
Unpleasant aspect of the pain
1
2
3
4
5
6
7
8
9
10
INSTRUCTIONS
For optimal and safe use, use only the
accessories provided by Electro-Medic.
Furthermore, proper adjustment of
the device’s intensity and a gradual
increase in levels will ensure the
comfort, relief, and improvement you
desire. We strongly advise you not to
increase the levels too quickly.
(Type BF applied part: Electrodes)
Содержание CARE
Страница 24: ...page ...
