Item #02245
Size 13.5”w x 11.25”d x 21.75”h
ASSEMBLY INSTRUCTIONS
Revised 10/18/10
Step 1
Press the two side wire panels into the back
plastic wall until they snap in place. (Do not
try to slide into groove.)
Step 2
Gently press the clear
front onto the two side
wire panels until they
snap in place.
Step 3
Lower the assembled cage sides onto the
base so that they rest on the inside lip of the
cage base. Lock the blue cage clips onto the
side of the wire then snap clips to the base to
lock in place.
Step 4
Assemble the cubicles by folding the walls up
and snapping the sides of each cubicle together.
TIP:
Check that the wire
and the back wall are
right side up. The Cage-N-
Tunnel Locking Caps are
attached to the top sec-
tions and the back wall is
marked “TOP”. The back
wall of the AvaTower has
a small lip on each side
that the edge of the wire
panels rests on.
Step 5
Attach the cubicles
and the wheel into the
AvaTower as shown by
pressing them in place
onto the square attach-
ment locations on the
back wall.
TIP:
Always make
certain your pet
has access to all
levels by checking
the arrangement of
all openings in the
cubicles. The maze
configuration is easy
for your pet to learn
and navigate.
TOP
