© 2018 Electromedical Technologies, Inc. Phoenix, AZ USA. Any use of editorial, pictorial or layout composition of this publication without express written consent from Electromedical Technologies,
Inc. is strictly prohibited. This publication was written, illustrated and prepared for print by Electromedical Technologies, Inc
4
Precautionary Instructions / Definition of Symbols
Read, understand and practice the precautionary and operating instruction found in this manual. Know the limitations and
hazards associated with using any electrical stimulation device. Observe the precautionary and operational decals placed
on the unit.
DO NOT operate the unit when connected to any unit other than the WellnessPro 2010 Plus. Do not operate the unit in an
environment of short-wave diathermy use.
Inspect treatment electrodes for cracks or damage before each use. Replace with new electrodes should any damage be
found.
Inspect treatment electrode leads and associated connectors before each use for signs of damage. Replace with new
leads upon notice of damage.
Simultaneous connection of a patient to a h.f. surgical equipment may result in burns at the site of the stimulator
electrodes and possible damage to the stimulator.
Operation in close proximity (3 feet) to shortwave or microwave therapy equipment may produce instability in the
stimulator outputs.
Care must be taken when operating this equipment around the other equipment. Potential electromagnetic or other
interference could occur to this or to the other equipment. Try to minimize this interference by not using other equipment in
conjunction with it.
The precautionary instructions found in this section and throughout this manual are indicated by specific symbols.
Understand these symbols and their definitions before operating this equipment. The definitions of these symbols are as
follows:
Caution
Indicates the need for the user to consult the instructions for use for important cautionary information such as warnings
and precautions that cannot, for a variety of reasons, be presented on the medical device itself.
Warning: electricity.
This symbol alerts you to a potentially hazardous condition such as the presence of dangerous voltage that Reduce the
Risk of Fire or Electrical Shock. Do not Expose This Apparatus to Rain or Moisture. Refer to the accompanying Warning
Label or Tag, and exercise extreme caution.
Class II equipment.
A product without a protective earth (PE) and where double or reinforced insulation is relied upon to provide the protection
against electric shock. The Class II symbol is a double walled square, indicating the product’s double insulation. To
identify equipment meetings the safety requirements specified for Class II equipment according to IEC 61140.
Type BF equipment
(
Non-cardiac floating, Applied Part
)
It is only intended for connection to patient’s skin but has floating input circuits. No connections between patient and earth.
Applied Part:
any part of the product under test that intentionally comes in contact with the patient.
Refer to instruction manual/booklet
To signify that the instruction manual/booklet must be read.
NOTE
Throughout this manual “NOTE” may be found. This is helpful information to aid in the particular area or
function being described.
