© 2018 Electromedical Technologies, Inc. Phoenix, AZ USA. Any use of editorial, pictorial or layout composition of this publication without express written consent from Electromedical Technologies,
Inc. is strictly prohibited. This publication was written, illustrated and prepared for print by Electromedical Technologies, Inc
28
Auto Codes:
The Well has 100 empty memory slots available for the practitioner or user to store custom programs.
An Auto code is a single or set of frequencies or codes stored in the memory for later use.
NOTE:
When programming Auto codes using
frequencies
you can store up to 24 different frequencies per memory
slot.
When programming Auto codes using single
codes
you can store up to 48 different codes per memory slot.
Code numbers are 1 through 250.
Auto Codes are numbered 1 through 1000.
To start any Auto code, press: Auto + Auto code start
If you try to use an Auto Code that is not in the memory, you will receive a "not valid number" error message.
Example 1:
Run Auto code 102 for 3 minutes per frequency (default settings)
Press:
102
Example 2:
Run Auto code 102 for 10 minutes per frequency
Press: 10 102
Increase lead intensity to desired level.
NOTE:
As soon as you press the
“AUTO” button, screen will appear as follows:
FLUX: on
Multi AUTO: on
WellnessPro PLUS
Enter AUTO Code
