-removes a setting completely from the list. That Cal
number can be reused later with the New command.
A setting cannot be deleted if readings have been
stored into a
batch
using that calibration setting.
Delete all readings in that batch first (see
Memory
Management
pg. 11). Although
Cal 1
cannot be
deleted, the
Delete
function will return it to factory
settings.
-sends a list of all Calibration Settings to either the IR
printer using the Gage’s built-in IR port, or to a PC’s
default printer using the included USB cable.
10
-loads an existing setting. Use the
(-)(+)
buttons to
scroll the
List
box until the desired setting appears,
then press . A warning message will prevent the
opening of a stored Cal setting if a
batch
is open and
has readings. Create a new batch first or open a
batch containing no readings. (see pg.12)
which appears at the bottom of the display. A
warning message will prevent the creation of a new
Cal Memory
if a
batch
is open and has readings.
Delete the batch first. (see pg.12)