Electrolux WM 1000 A, Инструкция пользователя

Страница: 6 / 28

1 Heavy soil button
By pressing the heavy soil button, the machine will take
in cold water only on programmes with a water
temperature of 50°-60°-95°C (programmes B-C and F).
These would normally be hot or hot and cold.
The water is then gradually heated to the required
temperature. The effect is to improve the overall wash
performance, particularly on biological stains such as
egg, blood and grass stains, and heavily soiled fabrics,
since the longer «cool-soak» phase as the water heats up
provides the right conditions for the powder and the
water temperature to interact, and achieve the best
possible results.
2 Quick wash button
By depressing this button on programmes B, C, D and F
the wash time is reduced.
This is suitable only for garments which are lightly
soiled.
3 Super Rinse button
By depressing this button on programmes for cottons
and linens the machine will perform the rinses with high
water level.
This is recommended for people who are allergic to
detergents and in areas where the water is very soft.
6
The Control Panel
MAINS
PROGRAMMES
H E AV Y
S O I L
Q U I C K
W A S H
S U P E R
R I N S E
FULL
RINSE HOLD
wash
S E N S O R
ON/OFF
lux
S H O W E R
COTTONS - LINENS
SYNTHETICS - MIXED FABRICS
WOOL - DELICATES Extra prewash
Whites
Fast coloureds
Non fast coloureds
Long spin A
B
C
D
Wool
Delicates
Rinses
Short spin
Drain H
J
K
Mixed Fabrics
Rinses
Softeners F
G
Autowasher
W M 1 0 0 0 A
1 2 3 4 5 7
IMPORTANT: PLEASE READ INSTRUCTION BOOK BEFORE USE
6
4 Full Rinse Hold button
Press this button to make the machine stop with water in
the drum after the cotton, synthetic or delicate wash
cycles.
This prevents any creasing which may occur if the
clothes are left damp in the drum. When it is convenient
for you to empty the machine, simply press this button
again so that the machine can proceed to drain and spin,
or turn the dial to the drain programme
.
If this button is not activated, the washing programmes
will end with a spin.
5 On/Off button
By depressing this button the machine starts operating.
When depressed again, the machine stops.
6 Mains-on light
This light illuminates when the machine starts working
and goes out when the ON/OFF button is released.
7 Programme selector dial
Turn the dial clockwise to select the required wash
programme.
The blue dots on the dial denote the programme stop
positions.
Before setting the dial to any position the machine must
be switched off by depressing the ON/OFF button again.