TSE-P 01.01 EB
51/56
599 34 55-61
EXAMPLES OF CONFIGURATION
Configuration code
:
A2A7808080E691F2
POSITION:
0
1
2
3
4
5
6
7
8
9
10
(A)
11
(B)
12
(C)
13
(D)
14
(E)
15
(F)
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
↓
VALUE:
A
2
A
7
8
0
8
0
8
0
E
6
9
1
F
2
TABLE OF CYCLE PHASE LEDS
On models not featuring the display window, it is advisable, before beginning the configuration procedure, to
convert the digits of the configuration code into binary format. To do this, prepare a table of the values to be
entered, which will be displayed by the second group (B) of washing phase LEDs (the positions, indicated by
the second group of 4 LEDs, are not modified).
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A
b
C
d
E
F
PO
SIT
IO
N
VAL
U
E
A
2
A
7
8
0
8
0
8
0
E
6
9
1
F
2
CONFIGURATION
1. Access the diagnostics system.
2. Turn the programme selector counter-clockwise by one position.
3. Press the START/PAUSE button sequentially to enter the letter
A
in position
0
. If the appliance features a
display window, this will show
0-A
; if not, the wash cycle LEDs should light as shown in column 0 of the
table (i.e. the fifth and seventh LEDs).
4. Press one of the option buttons (with the exception of START/PAUSE) to pass to the second position,
and enter
2
by pressing START/PAUSE. The display should now show
1-2
, and the LEDs should light as
shown in column 1 of the table (fourth and seventh).
5. Repeat this procedure to enter the remaining configuration digits. When all the digits have been entered,
press one of the option buttons (with the exception of START/PAUSE) to check that the configuration
code is correct.
6. Memorize the configuration code by pressing START/PAUSE and one of the option buttons at the same
time for at least 4 seconds, so that the configuration code is memorized by the main PCB.
