8
Installation manual
2.2
Technical data
Weight, net
kg
100
Drum volume
litres
53
Drum diameter
mm
452
Drum speed during wash
rpm
35/54
Drum speed during extraction
rpm
1450
Drum speed during extraction, Marine model
rpm
1300
G-factor, max.
530
G-factor, max. Marine model
425
Heating: Electricity
kW
4.4
Heating: Hot water
x
Frequency of the dynamic force
Hz
24.2
Floor load at max extraction
kN
1.2±0.3
Sound power/pressure level at extraction*
dB(A)
70/56
Sound power/pressure level at wash*
dB(A)
56/42
* Sound power levels measured according to ISO 60704.
2.3
Connections
Water valves
DN
BSP
20
3/4”
Capacity at 300 kPa
l/min
17
Drain valve
⌀
outer mm
50
Draining capacity (pump)
l/min
160
3 Setup
3.1
Unpacking
The machine is delivered bolted onto the transport pallet and packed in a crate or box.
Remove packing from the machine.
Remove the front panel by undoing the two screws on the bottom edge.
Remove the rear panel by undoing the screws.
Remove the three transport supports, one at the front and two at the back. Save the transport supports if the machine
needs to be moved in the future.
Remove the bolts between the machine and pallet. There is one to the right in the front of the machine and another
diagonally opposed to it, at the back of the machine.