Electrolux TWGL5E300, Руководство пользователя

Страница: 20 / 52

Problem 1)
Possible cause Remedy
Unsatisfactory
drying result.
Incorrect program selection.
Select a suitable program. 2)
The filter is clogged.
Clean the filter. 3)
Dryness (Trockengrad) op‐
tion was set to iron dry (Bü‐
geltrocken) .4)
Change Dryness (Trocken‐
grad) option to higher level.
The load was too large. Do not exceed the maximum
load size.
The airflow slots are clogged. Clean the airflow slots at the bot‐
tom of the appliance.
Dirt on the humidity sensor in the
drum.
Clean the front surface of the
drum.
Dryness level not set to desired
level.
Adjust the dryness level. 5)
The condenser is clogged.
Clean the condenser. 3)
The loading
door does not
close
The filter is not locked into posi‐
tion.
Put the filter in the correct posi‐
tion.
Laundry is trapped between the
door and the seal.
Remove trapped items and close
the door.
Not possible to
change the
program or op‐
tion.
After cycle start it is not possible
to change the program or option.
Turn the tumble dryer off and on.
Change the program or option
as required.
Not possible to
select an op‐
tion. Acoustic
signal is emit‐
ted.
The option you tried to select is
not available for the selected
program.
Turn the tumble dryer off and on.
Change the program or option
as required.
No drum light
Defective drum lamp. Contact the service centre to re‐
place the drum lamp.
Unexpected
duration time
on the display.
The drying duration is calculated
according to load size and
dampness.
This is automated — the appli‐
ance is working correctly.
Program inac‐
tive.
The water container is full. Drain the water container, push
the
Start/Pause button. 3)
www.electrolux.com 20