Electrolux TW SL5 E, Руководство пользователя

Страница: 14 / 60

8.
STEèM FUNCTION
Steam removes an odour, as the outdoor
air.
Decreases or removes creases. Makes the
pieces of clothing more flexible.
The pieces of clothing after steam
programme are easy to iron.
èt the start, because of wide
types of fabrics, apply small
steam loads. You easily get
the experience, which helps
you to use the sufficient
steam loads.
èt the end of cycle, if you will not iron, put
the pieces of clothing on the clothes
hanger.
8.1 How to fill water container
for steam system
CAUTION!
Use only distilled or
demineralized water.
èlways when the container is
empty the indicator is on
and you cannot start the
steam programmes.
For the first time you can use
the water attached in the
bottle.
The condensed water is also
applicable for steam system.
The condensate water must
be filtered e.g. with a coffee
filter to remove small pieces
of fluff.
If you dry with standard and
steam programmes, the
water container for steam
system fills automatically.
To fill water container:
1. Turn on the appliance.
2. Set 1 of the steam programmes.
3. Pull the water container. Keep it in
horizontal position.
4. Fill the water. until you hear the
acoustic signal.
The acoustic signal sounds when the
water container for steam system is full.
5. Put the water container.
8.2 Steam Load (Dampf)
This option is to set the required steam
load. It depends on the: type, weight and
volume of the laundry.
There are 3 possible selections:
minimum load
moderate - the default load
maximum load
8.3
Steam programmes
Programmes
Load
1)
Properties
Cotton (éaum-
wolle)
3 kg
To dry and remove the creases from the cotton
pieces of clothing. Frequently it is not necessary to
iron the cloths after this cycle.
www.electrolux.com 14