Electrolux TE1220E, Руководство по установке

Страница: 28 / 40

28
Installation manual
8.5 Table of pressure
The data label shows the injector size and the injector pressure and the countries that use this gas quality:
(Pressure: 1mmH
2
O=10Pa=0.1mbar)
Liquiedpetrole-
um gases Gas category Inlet pressure
(mbar) Injector pres-
sure (mbar) Injector size ( ⌀
mm)
Reference gas Label code May be avail-
able in follow-
ing countries
Butane 3B/P 30 27.4 1.21 G30 Sticker D AT, BE, CY, CZ,
DE, DK, EE,
FR, GB, HR,
HU, IT, LT, NL,
NO, RO, SE,
SI, SK
Propane 3P 37 36 1.21 G31 Sticker C BE, CH, CZ,
ES, FR, GB,
GR, HR, IE, IT,
LT, NL, PL, PT,
SI, SK, TR
Natural gas Gas category Inlet pressure
(mbar) Injector pres-
sure (mbar) Injector size ( ⌀
mm)
Reference gas Label number May be avail-
able in follow-
ing countries
2H 20 7.7 2.26 G20 Default AT, CH, CY, CZ,
DK, EE, ES, FI,
FR, GB, GR,
HR, IE, IT, LU,
LV, LT, NO, PT,
RO, SE, SK, SI,
TR
25 HU
2E 20 DE, PL, RO
8.6 Test run
• Select a program with heat.
• Start the machine.
• Check the injector pressure, see 8.5
Table of pressure .
• Check that the gas is burning evenly.
8.7 Converting instructions
This conversion shall be installed by a qualified service agency in accordance with the manufacturer’s in-
structions and all applicable codes and requirements of the authority having jurisdiction. The information in
these instructions must be followed to minimize the risk of fire or explosion or to prevent property damage,
personal injury, or death. The qualified service agency is responsible for the proper installation of this kit.
This conversion need the parts as below:
Parts List
Parts List
1 INJECTOR Burner-Butane or Propane
1 STICKER A LP Gas Valve Sticker
1 STICKER B Conversion Record
1 STICKER C Rating Plate Conversion of Propane Gas
1 STICKER D Rating Plate Conversion of Butane Gas
This dryer has been manufactured for use with Natural gas. If need convert to LP, please read these instructions be-
fore proceeding. This dryer is converted for use with L.P. gas, for altitudes up to 10,000 feet. For installations above
10,000 feet, contact a qualified service agency for derating instructions.