Electrolux TE1220E, Руководство по установке

Страница: 27 / 40

Installation manual
27
8.3 Connect the dryer to the gas supply
1. Remove the cap from the end of the gas inlet.
2. Install a female 3/8” NPT adampter at the end of the dryer gas inlet, the male size of the adampter is R1/2”.
3. Attach the flexible metal gas line connector to the adapter.
4. Tighten the flexible gas line connection, using two adjustable wrenches.
Important
Apply pipe compound or PTFE tape to the threads of the adapter and dryer gas inlet.
A B C
fig.W01624
A Adampter
B 3/8” NPT gas inlet
C the flexible metal gas line
8.4 Gas installation
This gas appliance is built to run on natural gas (group I2H), commonly identified by the nameplate on the dryer. The
following table lists the country abbreviations.
AL Albania IS Iceland
AT Austria IT Italy
BE Belgium JP Japan
BG Bulgaria LT Lithuania
CH Switzerland LU Luxembourg
CY Cyprus LV Latvia
CZ Czech Republic MK Republic of Macedonia
DE Germany MT Malta
DK Denmark NL Netherlands
EE Estonia NEC Non-europeancountries
ES Spain NO Norway
FI Finland PL Poland
FR France PT Portugal
GB UnitedKingdom RO Romania
GR Greece SE Sweden
HR Croatia SI Slovenia
HU Hungary SK Slovakia
IE Ireland TR Turkey
You should check the kind of energy gas that is available in your place.
There are many gas types of the same kind but the machine should be equipped with different kinds of injectors de-
pending on the gas type.