59
Drum with bearing
6
7
8
Replacing supporting rollers, bearing or drum
(continued from the previous page)
8. Demount bearing cover and center screw with
disc, fig. 5.
9. Remove the big belt around the drum
disengaging it from the drum, fig. 6.
10.Lift the
collector graphites from the drum and
fixate them in a position disengaging from the
drum
.
11.Carefully pull the drum out, fig. 7.
12.When replacing the bearing unscrew the
three nuts. Bearing housing with bearing and
triangular plate are loosened from the bottom
of the drum, fig. 8.
Continued on the following page.
5
