Electrolux SB907SJ05, Руководство пользователя

Страница: 21 / 27

MODELS: SB907SJ*05 SB907WJ*05 CONTROL PANEL LAYOUT
(cont.)
Child Lock Off
To turn Child Lock off you must be in Program Selection mode

Firstly “Temporarily unlock” Child Lock as shown above.

Press & hold “LOCK” for 5 seconds

All Program Indicators will flash.

“LOCK” Indicator also will flash.
The Child Lock is now permanently off.

“LOCK” indicator turns off

Unit is in Program Selection mode
Other Helpful Hints

You must use sufficient rinse aid to get good drying performance. This is especially important with plastic
dishes. Even when using ‘3-in-1’ combination detergent tablets, you may need to use a small amount of rinse aid as
well, particularly in hard water areas. Refer to Section C in the Care and Use Manual for more details on Rinse Aid
use and dosage adjustment.

Because this dishwasher has a hidden heating element, dishwasher proof plastic dishes can be safely placed in
the bottom basket.

The Door Handle enables the door to open easily but, as a safety feature, it is possible to open the door without
using the handle.

The initial wash time shown in the digital display window (915 & 925 models) may vary over time. The
dishwasher adjusts the displayed wash time after each wash depending on the wash load and water conditions
detected.

The NORMAL ECO program saves energy and water. It runs at a lower temperature but for a longer time to
ensure the wash performance. To save energy, dry performance is reduced so you may have to open the
door at the end of the wash cycle or even towel dry some dishes.

The Child Lock disables the button functions to prevent children from starting or disrupting a dishwasher in use.
It does not lock the door .
See the following instructions for a full description of Child Lock operation.
Boosted Dry Option (SB907, SB915 and SB925)
(Customer Option)
To gain enhanced drying performance by boosting the temperature and time during the final rinse, use this procedure:

Select Normal or Normal-Eco wash program.

Press PROGRAM and START buttons simultaneously . The estimated wash time shown on the display will
increase by around 10 – 20 minutes indicating that the Boost Dry Option is on.

On Model 907 the “Dry” progress indicator will come on for 3 seconds.

Press START to begin wash program.
To turn off Boosted Dry, repeat the above procedure.
Boosted Dry remains on for subsequent cycles until turned off.
The Boosted Dry option does not apply to the Rinse or Fragile wash programs.
Page 21 DW161