18
Malfunction
Unusual noises.
Possible Cause
Appliance is not level.
The appliance is touching
the wall or other objects.
A component, e.g. a pipe,
on the rear of the appliance
is touching another part of
the appliance or the wall.
Remedy
Readjust the feet.
Move the appliance
slightly.
The compressor does not
start immediately after
changing the temperature
setting.
This normal, no error has
occurred.
Water on the floor or on
storage shelves.
Water drain hole is
blocked.
See the “Cleaning and
Care” section.
The compressor starts after
a period of time.
If necessary, carefully bend
the component out of the
way.
Changing the light bulb
Warning!
There is a risk of electric shocks! Before changing the light
bulb, switch off the appliance and unplug it, or pull the fuse or the
circuit breaker.
Light bulb data: 220-240 V, max. 15 W
To switch off the appliance, turn the temperature regulator to positi-
on "0".
Unplug the mains plug.
To change the light bulb, undo the
screw.
Press the light bulb cover as shown
and slide it backwards.
Change the defective light bulb.
Refit the light bulb cover and the
screw.
Put the refrigerator back into operati-
on.
☞
☞
☞
☞
☞
☞
☞
AEG65
