Data di emissione:
February, 2019
Revisione:
2
Pag. :
8/24
-
P
ull out the mixing unit, the bell shaped seal
and the bowl gasket on the back (fig.7 and 8).
-
R
emove the drip tray by moving it upward
and pulling it outward (fig.9).
-
T
horoughly wash all the removed components
with hot water and dishwashing, but do not use
abrasive detergents or powders that can
damage the bowl.
IMPORTANT
D
o not use too aggressive sanitizers or
detergents, these kind of products could
damage the bowl and the other
components.
CAUTION
N
ever perform these washing operation
with a dish washing machine; failure to do
so could seriously damage the unit’s parts.
-
R
inse well and then place all the components
in the sanitizer solution; for proper sanitizing
the parts must remain fully plunged for 15
minutes or as recommended by the sanitizer
manufacturer.
-
A
fter respecting the correct sanitizing period,
rinse well all the components with clean water
and dry them up with a clean cloth.
-
T
horoughly wash the evaporator and the drip
tray surfaces with a sponge soaked with the
sanitizer (see fig.10).
- Repeat all these operations with a clean
sponge soaked with water and carefully dry up
all the surfaces with a clean cloth.
Fig. 7
Fig. 8
Fig. 9
Fig. 10
