Electrolux N520J, Инструкция по использованию и уходу

Страница: 7 / 20

Ice Station Assembly Installation
To fit the Ice station assembly to a top freezer model;
Fit the Ice Station carrier to the wire shelf by alligning the
outside of the carrier to the wires as shown in diagram 1.
Then push down in the middle of the carrier until it clips into
place as shown in diagram 2
Finally, slide the ice cube trays or storage bin into position
as shown in diagram 2
To remove, take out the ice cube trays and storage bin and
simply lift the carrier off the wire shelf.
To fit the Ice station assembly to a bottom freezer model;
Fit the Ice Station carrier to the wire shelf by alligning the
outside of the carrier to the wires as shown in diagram 1.
Make sure the four clips are
engaged onto the central wire (as
shown in diagram 2)
Then push up in the middle of the carrier until it clips into
place
Finally, slide the ice cube trays or storage bin into position
as shown in diagram 3
To remove, take out the ice cube trays and storage bin and
simply pull the carrier off the wire shelf.
3 - Installation
Page 7
Diagram 1
Diagram 1
Diagram 2
Diagram 3
To rear of
shelf
To front of
shelf
Diagram 2
(Some models only)