How to use the features of your
refrigerator
This section tells you how to make the most of the
refrigerators many useful features and how to clean
them.
Door storage bins (shelves)
Both the refrigerator and freezer have door storage bins.
You can adjust the refrigerator bins to meet different
storage needs. All the door bins are completely removable
for cleaning. If you want to remove or adjust a bin, lift it
over the support lugs on the inner door panel. Push the
bin down over the support lugs to lock it in place.
Dairy compartment
You can use the Dairy compartment to store foods such as
butter, margarine and cheeses. The compartment is slightly
warmer than the rest of the refrigerator compartment.
Crisper Bin
Storing vegetables
You can use the
crisper bin to store
vegetables, fruit or
small goods.You can
change the humidity
inside the bin by
rotating the humidity
control.
You should store vegetables in the crisper bin remembering
to set the humidity control to more humid.
Storing fruit & smallgoods
You can also store fruit in the crisper bin remembering to
set the humidity control to less humid.
Crisper Bin and shelf removal
• Remove the crisper bin(s) by pulling forward, then
up and forward.
• Remove the glass (if fitted) by flexing the rear of the
shelf backward to disengage the clip and allowing the
glass to drop out of the plastic frame.
• Remove the crisper shelf by lifting the catches on the
underside of the shelf and pulling the shelf forward.
Sliding Deli Shelf/ Bin (where fitted)
The sliding deli bin allows you to position the deli-bin in
any position within the refrigerator. This allows you to
conveniently locate it around stored food or to align it with
the multi flow vents for direct cooling.
Usage Instructions:
In order to correctly use the deli bin it should be located
fully on the left or right or in a central position. This will
align the multiflow vents with the ducting surfaces at
the rear of the deli bin. One or both of the vents can be
opened to allow cooler air to pass over foodstuffs stored
in the deli.
The air from these vents can be very cold, which is useful
for the fast chilling of food and drinks. However, items
may freeze if left near the vents. To prevent freezing, move
items away from the vents after chilling.
Cleaning: The sliding deli shelf can be removed for ease
of cleaning. In order to do so a flexible locking mechanism
has been incorporated into the rear shelf rail.
• Remove Deli Bin
• Remove the shelf assembly
by pulling it past the stops.
• Place the full assembly up
side down on a flat surface.
• Slide the sub frame to the
left until it engages with the locking mechanism.
• Pull the thumb tag away from the rail to disengage
it.
• Slide the sub frame past this and
allow it to flex back into position.
Clean the parts as required and allow to
dry. To replace the sub frame repeat this
procedure making sure to align the front
lip on the front shelf recess.
ALL GLASS IS SAFETY GLASS.
HOWEVER CAUTION SHOULD BE
TAKEN WHEN REMOVING THE
SHELF FOR REPOSITIONING OR FOR
CLEANING. AS THE ASSEMBLY IS
RELATIVELY HEAVY AND IF HELD IN
THE VERTICAL POSITION (AS SHOWN)
THE RUNNER ASSEMBLY MAY DROP
DOWN.
DO NOT REMOVE ANY SCREWS!
4 - Operating your refrigerator
Page 13
Содержание N520J
Страница 1: ...REFRIGERATION REFRIGERATION ...
Страница 19: ......